Cutting Mitre Joints in Skirting Board
Use the template of the Magic Mitre to measure the internal or external angles of the walls as previously instructed under the basic tips for cutting mitre joints section and set the pivoting workpiece holders and lock them both in position.
Place the skirting board into the locked workpiece holder. The left-hand side of the mitre joint should be placed for cutting in the left-hand locked workpiece holder.
The skirting board to be fitted to the wall to the right-hand side of the mitre joint should be placed in the right-hand workpiece holder for cutting.
Position the Skirting Board into the locked workpiece holder as shown in Fig 10.
Please Note
These TOP TIPS for cutting Mitre joints are provided as a service from MML (QS) Ltd. The information is intended to help with the cutting and fitting of mouldings around the house with the use of the "Magic Mitre" product.
MML (QS) Ltd assumes no liability for omissions, errors or the outcome of any project. The reader and user of the product must always exercise all reasonable caution and follow all applicable codes and regulations and the safety instruction.