Cutting Mitre Joints in Dado Rail
Measure the Dado Rail
Your dado rail should be fitted between 1 and 1.2 metres from the floor. Use the Template to measure the internal or external angles of the walls, where your dado rail will be placed, in the same way as instructed for cutting coving, set the pivoting workpiece holders and lock them both in position.
Position the Dado Rail
When placing the dado rail into the locked workpiece holder, the material that is to be fitted to the wall to the left-hand side of the mitre joint should be placed for cutting in the left-hand hand locked workpiece holder.
Position the dado rail into the locked workpiece holder as shown in fig 10.
Please Note
These TOP TIPS for cutting Mitre joints are provided as a service from MML (QS) Ltd. The information is intended to help with the cutting and fitting of mouldings around the house with the use of the "Magic Mitre" product.
MML (QS) Ltd assumes no liability for omissions, errors or the outcome of any project. The reader and user of the product must always exercise all reasonable caution and follow all applicable codes and regulations and the safety instruction.